Publicacions (36) Publicacions en què ha participat algun/a investigador/a

2018

  1. 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology

    AIP Conference Proceedings

  2. An optimization methodology for material databases to improve cutting force predictions when milling martensitic stainless steel JETHETE-M152

    Procedia CIRP

  3. Determining tool/chip temperatures from thermography measurements in metal cutting

    Applied Thermal Engineering, Vol. 145, pp. 305-314

  4. Development and characterisation of dynamic bi-phase (epoxy/PU) composites for enhanced impact resistance

    Composites Part B: Engineering, Vol. 155, pp. 122-131

  5. Digital Interferometry Applied to Thermogravitational Technique

    Microgravity Science and Technology, Vol. 30, Núm. 5, pp. 635-641

  6. Drawbead uplift force analytical model for deep drawing operations

    Journal of Physics: Conference Series

  7. Effect of cutting speed on the surface integrity of face milled 7050-T7451 aluminium workpieces

    Procedia CIRP

  8. Effect of single and double solution treatment on second phase dissolution of an Al-8.5Si-1.5Cu-0.4Mg alloy with different initial cooling rates

    73rd World Foundry Congress "Creative Foundry", WFC 2018 - Proceedings

  9. Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

    Composite Structures, Vol. 187, pp. 316-324

  10. Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites

    Composites Part A: Applied Science and Manufacturing, Vol. 109, pp. 280-289

  11. Experimental analysis of cutting force reduction during ultrasonic assisted turning of Ti6Al4V

    Procedia CIRP

  12. Experimental and FEM analysis of surface integrity when broaching Ti64

    Procedia CIRP

  13. Hardening prediction of diverse materials using the Digital Image Correlation technique

    Mechanics of Materials, Vol. 124, pp. 71-79

  14. High productivity mould robotic milling in Al-5083

    AIP Conference Proceedings

  15. High speed machinability of the aerospace alloy AA7075 T6 under different cooling conditions

    AIP Conference Proceedings

  16. Improving the prediction of the final part geometry in high strength steels U drawing by means of advanced material and friction models

    AIP Conference Proceedings

  17. Influence of Surface Finish and Porosity on the Fatigue behaviour of A356 Aluminium Casting Alloy

    MATEC Web of Conferences

  18. Influence of roll levelling on material properties and postforming springback

    AIP Conference Proceedings

  19. Influence of the deformation rate on the delamination of laminated composite materials

    Key Engineering Materials

  20. Laser sintered ceramic coatings of PZT nanoparticles deposited by Inkjet Printing on metallic and ceramic substrates

    Ceramics International, Vol. 44, Núm. 13, pp. 15603-15610