Publications (27) Publications auxquelles un chercheur a participé

2017

  1. A Coupled Eulerian Lagrangian Model to Predict Fundamental Process Variables and Wear Rate on Ferrite-pearlite Steels

    Procedia CIRP

  2. Advances in material and friction data for modelling of metal machining

    CIRP Annals - Manufacturing Technology, Vol. 66, Núm. 2, pp. 731-754

  3. Bending behaviour and oil canning in roll forming a steel channel

    International Journal of Advanced Manufacturing Technology, Vol. 91, Núm. 5-8, pp. 2875-2884

  4. Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions

    Procedia Engineering

  5. Cost efficiency of the non-associative flow rule simulation of an industrial component

    AIP Conference Proceedings

  6. Direct femtosecond laser irradiation of polymeric substrates for high resolution ink-jet printing of conductive lines

    Lasers in manufacturing (LiM)

  7. Double crystallographic groups and their representations on the Bilbao Crystallographic Server

    Journal of Applied Crystallography, Vol. 50, Núm. 5, pp. 1457-1477

  8. Effect of Thermal Annealing on Machining-Induced Residual Stresses in Inconel 718

    Journal of Materials Engineering and Performance, Vol. 26, Núm. 8, pp. 3728-3738

  9. Evolution of elastic modulus in roll forming

    International Journal of Material Forming, Vol. 10, Núm. 3, pp. 463-471

  10. Friction and Heat Transfer Coefficient Determination of Titanium Alloys during Hot Forging Conditions

    Advanced Engineering Materials, Vol. 19, Núm. 6

  11. Hole expansion test of third generation steels

    AIP Conference Proceedings

  12. Influence of Microstructure on Chip Formation when Broaching Ferritic-Pearlitic Steels

    Procedia CIRP

  13. Influence of the ferritic-pearlitic steel microstructure on surface roughness in broaching of automotive steels

    AIP Conference Proceedings

  14. Integration of virtual reality and CFD techniques for thermal fluid education

    ASME 2017 Heat Transfer Summer Conference, HT 2017

  15. Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment

    Materials Science and Engineering A, Vol. 682, pp. 441-453

  16. Neutroi-tekniketarako egokia den lehenengo berun-azido bateriarendiseinua eta optimizazioa

    II. Ikergazte nazioarteko ikerketa euskaraz: Kongresuko artikulu-bilduma.

  17. Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models

    Procedia Engineering

  18. Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model

    Journal of Physics: Conference Series

  19. On the age hardening response of aluminum containing magnesium sheets with zinc or manganese (AZ- and AM series alloys)

    Minerals, Metals and Materials Series

  20. Quality control by infrared thermography of the infusion manufacturing process of composite automotive specimens

    Quantitative InfraRed Thermography Journal, Vol. 14, Núm. 2, pp. 250-262