Publicaciones (45) Publicaciones en las que ha participado algún/a investigador/a

2016

  1. 2D finite element model and microstructural changes during cutting of Ti6Al4V in dry condition

    AIP Conference Proceedings

  2. Accurate drawbead modeling in stamping simulations

    Journal of Physics: Conference Series

  3. Alfombra y escanér de seguridad

    Mold Press: Revista de moldes y matrices, Núm. 51, pp. 34-35

  4. An analytical model for web-warping in variable width flexible roll forming

    International Journal of Advanced Manufacturing Technology, Vol. 86, Núm. 5-8, pp. 1541-1555

  5. An useful analytical formula to avoid thermal damage in the adaptive control of dry surface grinding

    International Journal of Mechanical Sciences, Vol. 117, pp. 152-161

  6. Characterisation of ultraviolet curing resins for 3D pultrusion

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  7. Comparison of structures applying the tools available at the Bilbao Crystallographic Server

    Journal of Applied Crystallography, Vol. 49, pp. 653-664

  8. Conformado semisolido (tixoconformado) de aceros para componentes de automoción

    Revista DYNA, Vol. 91, Núm. 3, pp. 296-300

  9. Desarrollo del proceso tixo forjado lateral para la fabricación de estructuras híbridas acero-aluminio

    Revista DYNA, Vol. 91, Núm. 4, pp. 438-444

  10. Design, manufacturing and evaluation of glass/polyester composite crash structures for lightweight vehicles

    International Journal of Automotive Technology, Vol. 17, Núm. 6, pp. 1013-1022

  11. Dynamic 4 ENF test for a strain rate dependent mode II interlaminar fracture toughness characterization of unidirectional carbon fibre epoxy composites

    Polymer Testing, Vol. 55, pp. 212-218

  12. Dynamic characterisation and modelling of the orthotropic self-reinforced polypropylene used in alternative FMLs

    Composite Structures, Vol. 153, pp. 682-691

  13. Effect of fibre volume fraction on energy absorption capabilities of E-glass/polyester automotive crash structures

    Composites Part B: Engineering, Vol. 85, pp. 1-7

  14. Effect of high-alumina ladle furnace slag as cement substitution in masonry mortars

    Construction and Building Materials, Vol. 123, pp. 404-413

  15. Energy efficient servo controlled roll levelling machines

    Key Engineering Materials

  16. Experimental characterization of the heat transfer coefficient under different close loop controlled pressures and die temperatures

    Applied Thermal Engineering, Vol. 99, pp. 813-824

  17. Friction characterisation in levelling processes

    Advances in Materials and Processing Technologies, Vol. 2, Núm. 4, pp. 503-513

  18. Heat transferred to the workpiece based on temperature measurements by IR technique in dry and lubricated drilling of Inconel 718

    Applied Thermal Engineering, Vol. 104, pp. 309-318

  19. High productivity machining of holes in Inconel 718 with SiAlON tools

    AIP Conference Proceedings

  20. Hot stamping of AA7075 aluminum sheets

    IOP Conference Series: Materials Science and Engineering