Publicacions (39) Publicacions en què ha participat algun/a investigador/a

2015

  1. A comparison of techniques to measure the wear flat area of conventional and superabrasive grinding wheels

    Journal of Tribology, Vol. 137, Núm. 2

  2. A note on interpreting tool temperature measurements from thermography

    Machining Science and Technology, Vol. 19, Núm. 1, pp. 174-181

  3. An analytical approach to predict web-warping and longitudinal strain in flexible roll formed sections of variable width

    International Journal of Mechanical Sciences, Vol. 90, pp. 228-238

  4. Análisis de las vibraciones de sistemas de rigidez no lineal mediante el cálculo fraccionario

    Revista DYNA, Vol. 90, Núm. 1, pp. 54-60

  5. Characterisation of the elastic and damping properties of traditional FML and FML based on a self-reinforced polypropylene

    Composite Structures, Vol. 131, pp. 47-54

  6. Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling

    Key Engineering Materials

  7. Comparison of the hardening behaviour of different steel families: From mild and stainless steel to advanced high strength steels

    International Journal of Mechanical Sciences, Vol. 101-102, pp. 10-20

  8. Comparison of three methods for material hardening parameter identification under cyclic tensioncompression loadings: Roll levelling case study

    Key Engineering Materials

  9. DOES UNIT CELL SIZE PLAY A ROLE? AN OVERVIEW OF MECHANICAL PROPERTIES OF WOVEN LAMINATES

    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS

  10. Determination of heat transfer coefficients for different initial tool temperatures and closed loop controlled constant contact pressures

    Key Engineering Materials

  11. Determination of heat transfer coefficients under closed loop controlled constant contact pressures

    Computer Methods in Materials Science, Vol. 15, Núm. 1, pp. 58-64

  12. Does unit cell size play a role? An overview of mechanical properties of woven laminates

    ICCM International Conferences on Composite Materials

  13. Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels

    Journal of Materials Engineering and Performance, Vol. 24, Núm. 10, pp. 3737-3745

  14. Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests

    Materials Science and Engineering A, Vol. 634, pp. 147-152

  15. Estudio de un techo de automóvil fabricado con material compuesto: análisis del coste fabricando con proceso RTM, con HP-RTMy y CRTM realizado on PAM-RTM

    Metalindustria, Núm. 6, pp. 58-63

  16. Finding Correlations between Tool Life and Fundamental Dry Cutting Tests in Finishing Turning of Steel

    Procedia Engineering

  17. Finite element prediction of the tool wear influence in Ti6Al4V machining

    Procedia CIRP

  18. Heat-flow determination through inverse identification in drilling of aluminium workpieces with MQL

    Production Engineering, Vol. 9, Núm. 4, pp. 517-526

  19. Improvement in Hot Stamping Efficiency Through Tooling Optimization

    HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL CHS2 (5TH INTERNATIONAL CONFERENCE)

  20. Improvement of accuracy in a free bending test for material characterization

    International Journal of Mechanical Sciences, Vol. 103, pp. 288-296