Publikationen (24) Publikationen, an denen Forscher/innen teilgenommen haben

2013

  1. A new surgical drill bit concept for bone drilling operations

    Materials and Manufacturing Processes, Vol. 28, Núm. 10, pp. 1065-1070

  2. A sensibility analysis to geometric and cutting conditions using the particle finite element method (PFEM)

    Procedia CIRP

  3. An extended elastic law to represent non-linear elastic behaviour: Application in computational metal forming

    International Journal of Mechanical Sciences, Vol. 77, pp. 57-64

  4. Avoiding chatter in traverse cylindrical grinding by continuous workpiece speed variation

    Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 135, Núm. 5

  5. Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting

    CIRP Annals - Manufacturing Technology, Vol. 62, Núm. 1, pp. 79-82

  6. Cutting process in glass peripheral milling

    Journal of Materials Processing Technology, Vol. 213, Núm. 9, pp. 1523-1531

  7. Development of a carbon fibre composite body for a radio controlled car through a PBL approach

    41st SEFI Conference

  8. Effectivity of fluoride treatment on hydrogen and corrosion product generation in temporal implants for different magnesium alloys

    Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Vol. 227, Núm. 12, pp. 1301-1311

  9. Effects of rotational speed, feed rate and tool type on temperatures and cutting forces when drilling bovine cortical bone

    Machining Science and Technology, Vol. 17, Núm. 4, pp. 611-636

  10. Evolution of surface roughness in grinding and its relationship with the dressing parameters and the radial wear

    Procedia Engineering

  11. Experimental characterization and computational simulations of the low-velocity impact behaviour of polypropylene

    Polymer International, Vol. 62, Núm. 11, pp. 1553-1559

  12. Influence of the number of tensile/compression cycles on the fitting of a mixed hardening material model: Roll levelling process case study

    Key Engineering Materials

  13. Multi revolution finite element model to predict machining induced residual stresses in inconel 718

    Procedia CIRP

  14. New strategy for the prediction of the gas pressure profile of superplastic forming of Al-5083 aluminium alloy

    Materials Science Forum

  15. Optibody: A new structural design focused in safety

    SAE Technical Papers

  16. Recent advances in modelling of metal machining processes

    CIRP Annals - Manufacturing Technology, Vol. 62, Núm. 2, pp. 695-718

  17. Remarks on the analysis method for determining diffusion coefficient in ternary mixtures

    Comptes Rendus - Mecanique

  18. Semi-discretization for stability analysis of in-feed cylindrical grinding with continuous workpiece speed variation

    International Journal of Advanced Manufacturing Technology, Vol. 69, Núm. 1-4, pp. 113-120

  19. Simulation of Springback and Microstructural analysis of Dual Phase Steels

    NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS

  20. Simulation of distortion due to machining of thin-walled components

    Procedia CIRP