Publikationen (28) Publikationen, an denen Forscher/innen teilgenommen haben

2010

  1. Assessment of Deburring Costs in Industrial Case Studies

    BURRS - ANALYSIS, CONTROL AND REMOVAL

  2. Characterization of friction coefficient and heat partition coefficient between an AISI4140 steel and a TiN-coated carbide - Influence of (Ca, Mn, S) steel's inclusions

    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol. 224, Núm. 10, pp. 1115-1127

  3. Comparison of the machinabilities of Ti6Al4V and TIMETAL® 54M using uncoated WC-Co tools

    Journal of Materials Processing Technology, Vol. 210, Núm. 2, pp. 197-203

  4. Development and validation of a numerical model for sheet metal roll forming

    International Journal of Material Forming, Vol. 3, Núm. SUPPL. 1, pp. 151-154

  5. Enhancement of Incremental Sheet Metal Forming Technology by Means of Stretch Forming

    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO

  6. Enhancement of incremental sheet metal forming technology by means of stretch forming

    AIP Conference Proceedings

  7. Evaluation of magnesium alloys with alternative surface finishing for the proliferation and chondro-differentiation of human mesenchymal stem cells

    Journal of Physics: Conference Series

  8. Fresado en desbaste de cajeras en titanio Ti6AI4V

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 374, pp. 82-88

  9. Geometrical accuracy improvement in flexible roll forming lines

    AIP Conference Proceedings

  10. Geometrical accuracy improvement in flexible roll forming lines

    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO

  11. Herramienta inteligente para la puesta a punto del proceso de rectificado sin centros

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 373, pp. 125-132

  12. High bandwidth temperature measurement in interrupted cutting of difficult to machine materials

    CIRP Annals - Manufacturing Technology, Vol. 59, Núm. 1, pp. 97-100

  13. Impact fatigue behavior of superelastic NiTi shape memory alloy wires

    Materials Science and Engineering A, Vol. 528, Núm. 2, pp. 764-769

  14. Influence of material parameters on serrated chip prediction in finite element modeling of chip formation process

    International Journal of Material Forming, Vol. 3, Núm. SUPPL. 1, pp. 519-522

  15. Instalación piloto para hidroconformado de tubo en caliente: de aleaciones de aluminio y aleaciones de magnesio

    IMHE: Información de máquinas-herramienta, equipos y accesorios, Núm. 374, pp. 76-80

  16. Investigations on the effects of friction modeling in finite element simulation of machining

    International Journal of Mechanical Sciences, Vol. 52, Núm. 1, pp. 31-42

  17. Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates

    Acta Materialia, Vol. 58, Núm. 8, pp. 2988-2998

  18. Mode crystallography of distorted structures

    Acta Crystallographica Section A: Foundations of Crystallography, Vol. 66, Núm. 5, pp. 558-590

  19. Modes vs. modulations: Symmetry-mode analysis of commensurate modulated structures compared with the superspace method

    Journal of Physics: Conference Series

  20. New models and global stability charts to avoid principal instabilities and constraints in throughfeed centerless grinding

    Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 132, Núm. 1, pp. 0110141-0110147