Aportacions a congrés (15) Publicacions en què ha participat algun/a investigador/a

2022

  1. Active Power Optimization of a Turning Process by Cutting Conditions Selection: A Q-Learning Approach

    IEEE International Conference on Emerging Technologies and Factory Automation, ETFA

  2. Anisotropic rate-dependent plasticity and fracture of AA5754

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

  3. Crystal Plasticity Modeling of Al Alloy under Linear and Non-Linear Loading

    Key Engineering Materials

  4. Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools

    Procedia CIRP

  5. Effect of innovative finishing operations on the tribological performance of steel 27MnCr5

    Procedia CIRP

  6. Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening

    Procedia CIRP

  7. Hole quality analysis of AISI 304-GFRP stacks using robotic drilling

    Procedia CIRP

  8. Impact performance of out of die UV cured pultruded profiles for vessel structures

    ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

  9. Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V

    Key Engineering Materials

  10. Influence of high frequency wobbling parameters on the weld quality of aluminium LBW

    Procedia CIRP

  11. Laser welding for stamping blank reinforcement: Signal monitoring for digital certification

    Procedia CIRP

  12. Necking Predictions with Neural Networks in Metal Forming Operations

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)

  13. Numerical analysis of AISI 321 alloy material parameters on rubber pad diaphragm forming

    International deep-drawing research group conference (IDDRG 2022)

  14. Numerical modelling of the drag finishing process at a macroscopic scale to optimize surface roughness improvement on additively manufactured (SLM) Inconel 718 parts

    Procedia CIRP

  15. Thematic Session 04: Metal Forming – Formability Characterization,Damage and Ductile Fracture

    Congress on Numerical Methods in Engineering CMN 2022 (2022. Las Palmas de Gran Canaria)