Aportacions a congrés (18) Publicacions en què ha participat algun/a investigador/a

2020

  1. A simple device to measure bend limit of sheet metals

    IOP Conference Series: Materials Science and Engineering

  2. Aluminum springback reduction by post-forming electric pulses

    Procedia Manufacturing

  3. Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion

    ECCM 2018 - 18th European Conference on Composite Materials

  4. Characterization of elastic and resistance behaviours of 3D printed continuous carbon fibre reinforced thermoplastics

    ECCM 2018 - 18th European Conference on Composite Materials

  5. Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites

    ECCM 2018 - 18th European Conference on Composite Materials

  6. Improvement of material databases for cutting force prediction in finishing conditions of A-356 aluminium alloy

    Procedia CIRP

  7. Influence of lubrication condition on the surface integrity induced during drag finishing

    Procedia CIRP

  8. Influence of the choice of the parameters on constitutive models and their effects on the results of Ti6Al4V orthogonal cutting simulation

    Procedia Manufacturing

  9. Monitoring of a hammer forging testing machine for high-speed material characterization

    Procedia Manufacturing

  10. Sensitivity analysis of the input parameters of a physical based ductile failure model of Ti-6Al-4V for the prediction of surface integrity

    Procedia CIRP

  11. Sensitivity to race-tracking of compression resin transfer moulding

    ECCM 2018 - 18th European Conference on Composite Materials

  12. Soft sensing force measurement approach in sheet metal forming facilities

    IOP Conference Series: Materials Science and Engineering

  13. Strain rate effect on the fracture behavior of the AA5754 aluminum alloy

    Procedia Manufacturing

  14. Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion

    Procedia CIRP

  15. Surface integrity when machining Inconel 718 using conventional lubrication and carbon dioxide coolant

    Procedia Manufacturing

  16. The effect of material surface roughness in aluminum forming

    Procedia Manufacturing

  17. The influence of the kinematic hardening on the FEM simulation of tension levelling process

    Procedia Manufacturing

  18. Workpiece material influence on stability lobe diagram

    Procedia Manufacturing