1GEP Zientzia, teknologia eta materialen transformaketa prozesuak

2019

1. 1st Esaform mobility grant: Modeling of post machining distortions in thin walls applied to aluminum parts compared to experimental results

   AIP Conference Proceedings

2. A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius

   Procedia CIRP

3. Air-coupled ultrasonic testing with Lamb waves for straight and curved GFRP plates

   Proceedings of Meetings on Acoustics

4. Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process

   AIP Conference Proceedings

5. Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3

   Procedia CIRP

6. Determination of emissivity and temperature of tool rake face when cutting AISI 4140

   Procedia Manufacturing

7. Enhanced energy absorption properties in 3D printed polymer matrix composite

   ECCM 2018 - 18th European Conference on Composite Materials

8. Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions

   Procedia CIRP

9. Experimental and numerical investigation of the cutting force during the angle shearing of several steels

   AIP Conference Proceedings

10. FEM modeling of hard turning 42CrMoS4 steel

    Procedia CIRP

11. Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism

    AIP Conference Proceedings

12. Friction Stir Welding of Lap Joints Using New Al–Li Alloys for Stringer-Skin Joints

    Minerals, Metals and Materials Series

13. Influence of chip segmentation of Ti64 on the topography of the machined surface

    AIP Conference Proceedings

14. Lightweighting potential of an automotive roof reinforcement using aluminum alloys in place of high strength steels

    AIP Conference Proceedings

15. Non-liquid alternative coolants in robotic machining

    AIP Conference Proceedings

16. Numerical prediction of force and energy consumption in roll forming processes

    AIP Conference Proceedings

17. Numerical study on the effect of microstructure on the mechanical behaviour of dual-phase steels

    AIP Conference Proceedings

18. Over-3D printing of continuous carbon fibre composites on organo-sheet substrates

    AIP Conference Proceedings

19. Perfilado 4.0: ayuda a la puesta a punto y aseguramiento de la calidad en procesos de perfilado

    22 CMH Congreso de fabricación avanzada y máquinas-herramienta

20. Semisolid forging of 250 automotive spindles of s48c steel

    Solid State Phenomena