Aportaciones congreso (22) Publicaciones en las que ha participado algún/a investigador/a

2016

  1. 2D finite element model and microstructural changes during cutting of Ti6Al4V in dry condition

    AIP Conference Proceedings

  2. Accurate drawbead modeling in stamping simulations

    Journal of Physics: Conference Series

  3. Characterisation of ultraviolet curing resins for 3D pultrusion

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  4. Energy efficient servo controlled roll levelling machines

    Key Engineering Materials

  5. High productivity machining of holes in Inconel 718 with SiAlON tools

    AIP Conference Proceedings

  6. Hot stamping of AA7075 aluminum sheets

    IOP Conference Series: Materials Science and Engineering

  7. Identification of friction coefficient in forging processes by means t-shape tests in high temperature

    Key Engineering Materials

  8. Influence of Tool Wear on Residual Stresses When Turning Inconel 718

    Procedia CIRP

  9. Influence of material and tribological modelling on the prediction of big size automotive components springback

    Key Engineering Materials

  10. Influence of material's hardening behaviour of DP1000 on numerical springback prediction

    AIP Conference Proceedings

  11. Influence of the pressure dependent coefficient of friction on deep drawing springback predictions

    AIP Conference Proceedings

  12. Influence of the tool temperature increment on the coefficient of friction behavior on the deep drawing process of HSS

    IOP Conference Series: Materials Science and Engineering

  13. Investigation of influencing factors on friction during ring test in hot forging using FEM simulation

    AIP Conference Proceedings

  14. Out of die ultraviolet pultrusion process set-up: Limitations of photo-differential scanning calorimetry analysis

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  15. Press hardening of alternative high strength aluminium and ultra-high strength steels

    AIP Conference Proceedings

  16. Quality control by Infrared Thermography of the infusion manufacturing process of composite automotive specimens

    13TH QUANTITATIVE INFRARED THERMOGRAPHY CONFERENCE

  17. Repeated low energy impact behaviour of self-reinforced polypropylene fibre metal laminates

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

  18. Roll levelling semi-analytical model for process optimization

    Journal of Physics: Conference Series

  19. Semisolid forming of 42CrMo4E steel grade

    AIP Conference Proceedings

  20. Sensitivity analysis on an AC600 aluminum skin component

    Journal of Physics: Conference Series