Aportacions a congrés (12) Publicacions en què ha participat algun/a investigador/a

2015

  1. Comparison of several behaviour laws intended to produce a realistic Ti6Al4V chip by finite elements modelling

    Key Engineering Materials

  2. Comparison of three methods for material hardening parameter identification under cyclic tensioncompression loadings: Roll levelling case study

    Key Engineering Materials

  3. DOES UNIT CELL SIZE PLAY A ROLE? AN OVERVIEW OF MECHANICAL PROPERTIES OF WOVEN LAMINATES

    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS

  4. Determination of heat transfer coefficients for different initial tool temperatures and closed loop controlled constant contact pressures

    Key Engineering Materials

  5. Does unit cell size play a role? An overview of mechanical properties of woven laminates

    ICCM International Conferences on Composite Materials

  6. Finding Correlations between Tool Life and Fundamental Dry Cutting Tests in Finishing Turning of Steel

    Procedia Engineering

  7. Finite element prediction of the tool wear influence in Ti6Al4V machining

    Procedia CIRP

  8. Improvement in Hot Stamping Efficiency Through Tooling Optimization

    HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL CHS2 (5TH INTERNATIONAL CONFERENCE)

  9. Numerical simulation of surface modification during machining of nickelbased superalloy

    Procedia CIRP

  10. Room temperature forming of AA7075 aluminum alloys: W-Temper process

    Key Engineering Materials

  11. Tailor tempering and hot-spotting of press hardened boron steels

    Key Engineering Materials

  12. Tool wear prediction in machining process using a microstructure-based finite element model

    Key Engineering Materials