1ENG Science, techonology and material transformation processes

2014

1. Analysis of a thixo-lateral forged spindle from LTT C45, LTT C38 and LTT 100cr6 steel grades

   Solid State Phenomena

2. Characterization of a dual phase steel using tensile and free bending tests

   AIP Conference Proceedings

3. Correlation between tool flank wear, force signals and surface integrity when turning bars of Inconel 718 in finishing conditions

   International Journal of Machining and Machinability of Materials

4. Development of a new methodology to use recycled Secondary Aluminum substituting primary A356 aluminum alloy in safety components in low pressure technology

   71st World Foundry Congress: Advanced Sustainable Foundry, WFC 2014

5. Effects of the flow stress in finite element simulation of machining inconel 718 alloy

   Key Engineering Materials

6. Evolution of residual stresses induced by machining in a nickel based alloy under static loading at room temperature

   Procedia CIRP

7. Friction coefficient identification in roll forming processes

   Key Engineering Materials

8. Hysteretic shear behaviour of fibre-reinforced composite laminates

   16th European Conference on Composite Materials, ECCM 2014

9. Influence of tooling material and temperature on the final properties of tailor tempered boron steels

   Key Engineering Materials

10. Inpregnazio azkarreko RTM-a automozio sektorerako

    II Materialen Zientzia eta Teknologia Kongresua

11. Ion-beam modification of colloidal silica particle masks to tailor the size of ordered arrays of Ag nanostructures produced by nanosphere lithography

    Materials Research Society Symposium Proceedings

12. Karbono-zuntzez osatutako preforma baten konpresioaren karakterizazio esperimentala

    II Materialen Zientzia eta Teknologia Kongresua

13. Manufacturing cost comparison of RTM, HP-RTM and CRTM for an automotive roof

    16th European Conference on Composite Materials, ECCM 2014

14. Prediction of the low-energy impact response of a self-reinforced polymer based on a rheolocial model

    16th European Conference on Composite Materials, ECCM 2014

15. Scaling effects in the dynamic behaviour of fibre-metal laminates based on a self-reinforced polypropylene

    Proceedings of the International Conference on Structural Dynamic , EURODYN

16. Scaling effects in the dynamic behaviour of fibre-metal laminates based on a self-reinforced polypropylene

    EURODYN 2014: IX INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS

17. Selection of led or conventional UV lamp based on the composite thickness

    16th European Conference on Composite Materials, ECCM 2014

18. Springback investigation in roll forming of a V-section

    Applied Mechanics and Materials

19. Structural optimization and additive manufacturing

    Key Engineering Materials

20. Testing and modeling of roll levelling process

    Key Engineering Materials