Kongressbeiträge (27) Publikationen, an denen Forscher/innen teilgenommen haben

2012

  1. Analysis of the behavior of grinding wheels in surface grinding

    AIP Conference Proceedings

  2. Comparison study of two constitutive equations for Al-5083 superplastic aluminium alloy

    Materialwissenschaft und Werkstofftechnik

  3. Cutting force prediction in drilling of anisotropic materials

    Key Engineering Materials

  4. Cutting force prediction in drilling of titanium alloy

    Journal of Advanced Mechanical Design, Systems and Manufacturing

  5. De-icing of carbon composite plates by piezoelectric actuators

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

  6. Effect of heat treatment conditions on the machinability of Ti64 and Ti54M alloys

    Procedia CIRP

  7. Effect of thickness on the interfacial strenght of layer by layer in situ UV curing

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

  8. Effects of rotational speed and feed rate on temperature rise, feed force and cutting torque when drilling bovine cortical bone

    AIP Conference Proceedings

  9. Effects of the velocity in the delamination of carbon-epoxy plates subjected to low-velocity impact load

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

  10. Evolution of texture and microstructure of AZ31 Mg alloy sheet at high strain rates

    Materials Science Forum

  11. Hysteretic behaviour of fibre-reinforced composites

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

  12. Impact characterization and simulation of a FML based on a self-reinforced polypropylene

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

  13. Incremental forming of sandwich materials

    Key Engineering Materials

  14. Influence of cutting conditions on temperature rise, feed force and cutting torque when drilling bone

    Advanced Materials Research

  15. Influence of heat treatment on the machinability of titanium alloys

    Materials and Manufacturing Processes

  16. Influence of material's yield strength on the kinematic hardening of steels

    Steel Research International

  17. Ludwik's model parameter identification for v-bending simulations with Ti64 and MS1200

    Key Engineering Materials

  18. Machining behaviour of Ti-6Al-4V and Ti-5553 alloys in interrupted cutting with PVD coated cemented carbide

    Procedia CIRP

  19. Modeling of nesting effect on the delaminated surface for woven structures

    ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials

  20. Optimization of superplastic forming of aluminium Al-5083 alloy based on a mechanism-based hyperbolic equation

    Steel Research International