Articles (17) Publications auxquelles un chercheur a participé

2018

  1. Determining tool/chip temperatures from thermography measurements in metal cutting

    Applied Thermal Engineering, Vol. 145, pp. 305-314

  2. Development and characterisation of dynamic bi-phase (epoxy/PU) composites for enhanced impact resistance

    Composites Part B: Engineering, Vol. 155, pp. 122-131

  3. Digital Interferometry Applied to Thermogravitational Technique

    Microgravity Science and Technology, Vol. 30, Núm. 5, pp. 635-641

  4. Effect of the manufacturing process on the energy absorption capability of GFRP crush structures

    Composite Structures, Vol. 187, pp. 316-324

  5. Effect of ultraviolet curing kinetics on the mechanical properties of out of die pultruded vinyl ester composites

    Composites Part A: Applied Science and Manufacturing, Vol. 109, pp. 280-289

  6. Hardening prediction of diverse materials using the Digital Image Correlation technique

    Mechanics of Materials, Vol. 124, pp. 71-79

  7. Laser sintered ceramic coatings of PZT nanoparticles deposited by Inkjet Printing on metallic and ceramic substrates

    Ceramics International, Vol. 44, Núm. 13, pp. 15603-15610

  8. Mecanismo de ancho de vía variable para vehículo eléctrico urbano de tres ruedas

    Anales de Ingeniería Mecánica

  9. Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel

    Journal of Materials Processing Technology, Vol. 260, pp. 87-96

  10. New calibration method to measure rake face temperature of the tool during dry orthogonal cutting using thermography

    Applied Thermal Engineering, Vol. 137, pp. 74-82

  11. On the plastic flow rule formulation in anisotropic yielding aluminium alloys

    International Journal of Advanced Manufacturing Technology, Vol. 99, Núm. 1-4, pp. 255-274

  12. Press hardening of alternative materials: conventional high- strength steels

    International Journal of Material Forming, Vol. 11, Núm. 5, pp. 663-670

  13. Proceso de mecanizado fiable mediante uso intensivo de modelización y monitorización del proceso: enfoque 2025

    Revista DYNA, Vol. 93, Núm. 6, pp. 689-696

  14. Reduction of distortions in large aluminium parts by controlling machining-induced residual stresses

    International Journal of Advanced Manufacturing Technology, Vol. 97, Núm. 1-4, pp. 967-978

  15. Simulation and experimental validation of the effect of material and processing parameters on the injection stage of compression resin transfer molding

    Polymer Composites, Vol. 39, Núm. 12, pp. 4333-4340

  16. Study on the influence of the springback on the hole expansion ratio characterization

    Materials Science: Materials Review, Vol. 2, Núm. 1

  17. Ti6Al4V metal cutting chip formation experiments and modelling over a wide range of cutting speeds

    Journal of Materials Processing Technology, Vol. 255, pp. 898-913