Articles (27) Publications in which a researcher has participated

2015

  1. A comparison of techniques to measure the wear flat area of conventional and superabrasive grinding wheels

    Journal of Tribology, Vol. 137, Núm. 2

  2. A note on interpreting tool temperature measurements from thermography

    Machining Science and Technology, Vol. 19, Núm. 1, pp. 174-181

  3. An analytical approach to predict web-warping and longitudinal strain in flexible roll formed sections of variable width

    International Journal of Mechanical Sciences, Vol. 90, pp. 228-238

  4. Análisis de las vibraciones de sistemas de rigidez no lineal mediante el cálculo fraccionario

    Revista DYNA, Vol. 90, Núm. 1, pp. 54-60

  5. Characterisation of the elastic and damping properties of traditional FML and FML based on a self-reinforced polypropylene

    Composite Structures, Vol. 131, pp. 47-54

  6. Comparison of the hardening behaviour of different steel families: From mild and stainless steel to advanced high strength steels

    International Journal of Mechanical Sciences, Vol. 101-102, pp. 10-20

  7. Determination of heat transfer coefficients under closed loop controlled constant contact pressures

    Computer Methods in Materials Science, Vol. 15, Núm. 1, pp. 58-64

  8. Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels

    Journal of Materials Engineering and Performance, Vol. 24, Núm. 10, pp. 3737-3745

  9. Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests

    Materials Science and Engineering A, Vol. 634, pp. 147-152

  10. Estudio de un techo de automóvil fabricado con material compuesto: análisis del coste fabricando con proceso RTM, con HP-RTMy y CRTM realizado on PAM-RTM

    Metalindustria, Núm. 6, pp. 58-63

  11. Heat-flow determination through inverse identification in drilling of aluminium workpieces with MQL

    Production Engineering, Vol. 9, Núm. 4, pp. 517-526

  12. Improvement of accuracy in a free bending test for material characterization

    International Journal of Mechanical Sciences, Vol. 103, pp. 288-296

  13. Influence of seawater immersion in low energy impact behavior of a novel colombian fique fiber reinforced bio-resin laminate

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 82, Núm. 194, pp. 170-177

  14. Loading rate dependency on mode I interlaminar fracture toughness of unidirectional and woven carbon fibre epoxy composites

    Composite Structures, Vol. 121, pp. 75-82

  15. Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography

    CIRP Annals - Manufacturing Technology, Vol. 64, Núm. 1, pp. 57-60

  16. Mode I fatigue fracture toughness of woven laminates: Nesting effect

    Composite Structures, Vol. 133, pp. 226-234

  17. Nesting effect on the mode II fracture toughness of woven laminates

    Composites Part A: Applied Science and Manufacturing, Vol. 74, pp. 174-181

  18. Nesting effect on the mode i fracture toughness of woven laminates

    Composites Part A: Applied Science and Manufacturing, Vol. 74, pp. 166-173

  19. Numerical simulation of the roll levelling of DP1000 steel using a nonlinear combined hardening material model

    Computer Methods in Materials Science, Vol. 15, Núm. 1, pp. 44-50

  20. On the Bauschinger effect in dual phase steel at high levels of strain

    Materials Science and Engineering A, Vol. 643, pp. 127-136