Publications (151)

¹ Publications considérées comme production du groupe.

Voir les données de recherche référencées.

filter_list Mechanics%20of%20Materials

2025

  1. Comparative Study on Torque Ripple Reduction Techniques for an Automotive Permanent Magnet Motor without Skew

    2025 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)

  2. European Initiatives Addressing High Efficiency and Low-Cost Electric Motors for Circularity and Low use of Rare Resources

    SAE Technical Papers

  3. Fast Finite Element Based Vibration Response Calculation Procedure for Permanent Magnet Synchronous Machines

    IEEE Transactions on Industry Applications, Vol. 61, Núm. 1, pp. 104-114

  4. Hybrid fault detection and diagnosis approach of power connections for induction motors

    2025 IEEE Workshop on electrical machines design, control and diagnosis, WEMDCD

  5. Influence of Manufacturing Tolerances and Eccentricities on the Electromotive Force in Permanent Magnet Synchronous Motors

    IEEE Transactions on Industry Applications, Vol. 61, Núm. 5, pp. 7046-7060

  6. Insulation Technologies for State-of-the-Art Electrical Machines Used in Transport Electrification

    2025 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)

  7. Optimisation of an Automotive Permanent Magnet Motor with Low Coercivity Recycled Magnets Considering Demagnetisation

    2025 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD)

  8. Short-loop recycling of elevator motor magnets by hydrogen decrepitation and FAST sintering

    Metallurgical Research and Technology, Vol. 122, Núm. 6

  9. Thermodynamics-guided high-throughput discovery of magnetic high-entropy alloys fabricated by spark plasma sintering at different temperatures

    Journal of Alloys and Compounds, Vol. 1049, pp. 185342

2024

  1. A Ground Fault Detection Method for Double Fed Induction Machines via DC Grounding Resistor Voltage Evaluation

    IEEE Transactions on Industry Applications, Vol. 60, Núm. 6, pp. 8821-8832

  2. A Ground Fault Location Technique for Wound Field Poles of Synchronous Machines Through Frequency Response Analysis

    IEEE Journal of Emerging and Selected Topics in Industrial Electronics, Vol. 5, Núm. 4, pp. 1435-1446

  3. A Navigation Algorithm Based on the Reinforcement Learning Reward System and Optimised with Genetic Algorithm

    Mathematics, Vol. 12, Núm. 24

  4. A Novel Topology for High Voltage Battery Energy Storage Systems

    Proceedings - 24th EEEIC International Conference on Environment and Electrical Engineering and 8th I and CPS Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2024

  5. A Soft Start Method for Doubly Fed Induction Machines Based on Synchronization with the Power System at Standstill Conditions

    Machines, Vol. 12, Núm. 12

  6. AC Ground Fault Location Method Through Voltage Frequency Components Analysis for Variable Speed Drives

    IEEE Transactions on Industry Applications, Vol. 60, Núm. 6, pp. 8845-8855

  7. AC Ground Fault Location Method for Variable Speed Drives Using Lissajous Curves

    IEEE Transactions on Industry Applications, Vol. 60, Núm. 6, pp. 8912-8922

  8. Adoption of Multiphase and Variable Flux Motors in Automotive Applications

    Applied Sciences (Switzerland), Vol. 14, Núm. 23

  9. Analysis of Multiphase Permanent Magnet Motors via Space-Harmonic Model

    2024 International Conference on Electrical Machines (ICEM)

  10. Automatic Classification of Rotating Rectifier Faults in Brushless Synchronous Machines

    Electronics (Switzerland), Vol. 13, Núm. 23

  11. Comparison of Impedance Spectroscopy and Partial Discharge Analysis as Insulation Health Diagnosis Techniques

    2024 International Conference on Electrical Machines, ICEM 2024